Radioanalytical separation and size-dependent ion exchange property of micelle-directed titanium phosphate nanocomposites

Nanocomposite titanium-phosphate (TiP) of different sizes was synthesized using Triton X-100 (polyethylene glycol-p-isooctylphenyl ether) surfactant. The materials were characterized by FTIR and powdered X-ray diffraction (XRD). The structural and morphological details of the material were obtained by scanning electron microscopy (SEM) and transmission electron microscopy. The SEM study was followed by energy dispersive spectroscopic analysis for elemental analysis of the sample. The important peaks of the XRD spectra were analyzed to determine the probable composition of the material. The average size distribution of the particles was determined by dynamic light scattering method. Ion exchange capacity was measured for different metal ions with sizes of the TiP nanocomposite and size-dependent ion exchange property of the material was investigated thoroughly. The nanomaterial of the smallest size of around 43 nm was employed to separate carrier-free ^137mBa from ¹³⁷Cs in column chromatographic technique using 1.0 M HNO₃ as eluting agent at pH 5.     

Sorptive elimination of fluoride from contaminated groundwater in a fixed bed column: A kinetic model validation based study

The current investigation involves a continuous adsorption experiment in a packed bed column for the sorptive elucidation of fluoride from contaminated groundwater using an activated soil-clay mixture. Through the combination of naturally accessible laterite soil with silica enriched clay (3:1 ratio), a low-cost Al–Si heterogeneous material has been developed. Following detailed characterization, the developed materials were employed in a long-time column process to achieve a high degree of fluoride separation from real-world groundwater. In a packed bed column investigation, the effect of bed height, initial fluoride concentration, and flow rate on the breakthrough properties of the adsorption system were investigated. By using a non-linear regression equation, three model kinetics, such as the Thomas Model, Adams-Bohart Model, and Yoon-Nelson Model, were fitted to validate the column-based experimental data, by analysing the breakthrough curves profiles, and distinct kinetic parameters. The Bed Depth Service Time Analysis (BDST) model was tested to express the effect of bed height on breakthrough curves, as well as to predict the time for breakthrough, and material depletion under optimal conditions. The Thomas and Yoon-Nelson models were identified to be the most appropriate ones for describing the entire breakthrough curve, whereas the Adams-Bohart model was only utilised to predict the first half of the dynamic process. With correlation coefficients (R²) 0.96, the experimental results were well suited to Thomas, Yoon-Nelson, and Adams-Bohart models. Finally, regeneration assessment was carried out where even after four cycles of operation, regenerated adsorbent showed a rejection efficacy of 78% to fluoride that proves the viability of the material and methodology.     

Improvement in the light conversion efficiency of silicon solar cell by spin coating of CuO,ZnO nanoparticles and CuO/ZnO mixed metal nanocomposite material

Synthesis of pure Zinc oxide (ZnO), Copper oxide (CuO) nanoparticles (NPs) and their (ZnO/CuO) nanocomposites (NCs) in 1:1 M ratio were successfully prepared by co-precipitation method. The structural properties of the as synthesized nanoparticles and nanocomposite materials were investigated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) techniques. Optical band-gap studies were done using UV–Visible absorption spectroscopy. Photovoltaic properties of pure ZnO NPs, CuO NPs and ZnO/CuO NCs coated over a single-crystalline silicon solar cell were carried out to compare improvement of light-conversion efficiency in coated solar cell. The maximum light conversion efficiencies were found to be of 8.02% for CuO (3 mg/ml concentration) and 7.28% for ZnO NPs (3 mg/ml concentration), whereas that of mixed metal nanocomposite CuO/ZnO NCs was found to be 7.62%. at very low concentration of 1 mg/ml. This indicates with low concentration of mixed metal NCs an improvement in light efficiency can be obtained. The enhancement in efficiency could be due to formation of p - n heterojunction by CuO/ZnO NCs composites which enhances the number of electrons and holes participating in conduction on the surface.     

A new high: Cannabis as a budding source of carbon-based materials for electrochemical power sources

Cannabis sativa L., a low-cost, fast-growing herbaceous plant, is seeing a resurgence in widespread cultivation as a result of new policies and product drive. Its biodegradable and environmentally benign nature coupled with its high specific surface area and three-dimensional hierarchal structure makes it an excellent candidate for use as a biomass-derived carbon material for electrochemical power sources. It is proposed that this ‘wonder crop’ could have an important role in the energy transition by providing high-functioning carbon-based materials for electrochemistry. In this article, all instances of C. sativa usage in batteries, fuel cells and supercapacitors are discussed with a focus on highlighting the high capacity, rate capability, capacitance, current density and half-wave potential that can be achieved with its utilisation in the field.     

Selenium Alleviates the Adverse Effect of Drought in Oilseed Crops Camelina (Camelina sativa L.) and Canola (Brassica napus L.)

Drought poses a serious threat to oilseed crops by lowering yield and crop failures under prolonged spells. A multi-year field investigation was conducted to enhance the drought tolerance in four genotypes of Camelina and canola by selenium (Se) application. The principal aim of the research was to optimize the crop yield by eliciting the physio-biochemical attributes by alleviating the adverse effects of drought stress. Both crops were cultivated under control (normal irrigation) and drought stress (skipping irrigation at stages i.e., vegetative and reproductive) conditions. Four different treatments of Se viz., seed priming with Se (75 μM), foliar application of Se (7.06 μM), foliar application of Se + Seed priming with Se (7.06 μM and 75 μM, respectively) and control (without Se), were implemented at the vegetative and reproductive stages of both crops. Sodium selenite (Na₂SeO₃), an inorganic compound was used as Se sources for both seed priming and foliar application. Data regarding physiochemical, antioxidants, and yield components were recorded as response variables at crop maturity. Results indicated that WP, OP, TP, proline, TSS, TFAA, TPr, TS, total chlorophyll contents, osmoprotectant (GB, anthocyanin, TPC, and flavonoids), antioxidants (APX, SOD, POD, and CAT), and yield components (number of branches per plant, thousand seed weight, seed, and biological yields were significantly improved by foliar Se + priming Se in both crops under drought stress. Moreover, this treatment was also helpful in boosting yield attributes under irrigated (non-stress) conditions. Camelina genotypes responded better to Se application as seed priming and foliar spray than canola for both years. It has concluded that Se application (either foliar or priming) can potentially alleviate adverse effects of drought stress in camelina and canola by eliciting various physio-biochemicals attributes under drought stress. Furthermore, Se application was also helpful for crop health under irrigated condition.     

Antioxidant,Anti-inflammatory and Biosorption Properties of Starch Nanocrystals In Vitro Study: Cytotoxic and Phytotoxic Evaluation

This study aimed to investigate the antioxidant, anti-inflammatory and biosorption properties of starch nanocrystals (SNC). The characterization of synthesized SNC was done using various analytical techniques like microscopic and spectroscopic analysis. The antioxidant property was determined using DPPH (2,2-diphenyl-1-picrylhydrazyl) assay and metal ion chelating assay. SNC showed the highest scavenging activity of 70.03?±?0.74% at 100 µg/mL concentration. Protein denaturation assay and proteinase inhibitory assay depicted the anti-inflammatory property of SNC. The results revealed that the maximum inhibition activity was found at 100 µg/mL with 72.71% inhibition. The maximum removal efficiency was found to be 83.42% at pH 2.0 with 0.15 g biosorbent. As the pH increases, biosorption capacity of SNC were reduced from 8.17 to 6.30 mg/g and the efficiency of the dye removal was decreased from 80.95 to 36.01%. The shape of synthesized SNC was spherical nanoplatelets and it shows agglomeration. The Langmuir isotherm model is best suited for the biosorption experiments with the R2 value of 0.986. SNC were subjected to cytotoxic and phytotoxic evaluation. Cell viability and phytotoxic assays proves the non-toxic nature of the SNC.

     

Protected nodes and the collapse of Fermi arcs in high-T{c} cuprate superconductors

Angle resolved photoemission on underdoped Bi2Sr2CaCu2O8 reveals that the magnitude and d-wave anisotropy of the superconducting state energy gap are independent of temperature all the way up to T{c}. This lack of T variation of the entire k-dependent gap is in marked contrast to mean field theory. At T{c} the point nodes of the d-wave gap abruptly expand into finite length "Fermi arcs." This change occurs within the width of the resistive transition, and thus the Fermi arcs are not simply thermally broadened nodes but rather a unique signature of the pseudogap phase.     

Microwave-Assisted Graft Copolymerization of Cellulosic Fibers for Removal of Heavy Metal Ions from Aqueous Solution

Functional materials obtained from cellulosic biofibers have gained attention due to the growing demand for them in the field of wastewater remediation. In view of the technological significance of functionalized cellulosic biofibers in wastewater treatment, the present study is a green approach to functionalized cellulosic fibers through graft copolymerization under microwave irradiation. The grafted cellulosic polymers were subsequently subjected to heavy metal ion adsorption studies in order to assess their application in wastewater remediation. The effects of pH, contact time, temperature, and metal ion concentration were studied in batchwise adsorption experiments. The Langmuir, Freundlich, and Tempkin models were used to show the adsorption isotherms. The maximum monolayer capacities, q _m. calculated using the Langmuir isotherm for Zn²⁺, Cd²⁺, and Pb²⁺ were found to be 37.79, 69.68, and 96.81 mg/g respectively. The thermodynamic parameter ΔH° and ΔG° values for metal ion adsorption on functionalized cellulosic fibers showed that adsorption process was spontaneous as well as exothermic in nature.     

Confinement of CuII–Phthalocyanine in a Bioinspired Hybrid Nanoparticle‐Assembled Structure Yields Selective and Stable Epoxidation Catalysts

Herein, we demonstrate that a bioinspired assembly of silica nanoparticles with polyamines as structure‐directing agents similar to that known for the biosilicification of diatoms can pave the way for the efficient encapsulation of sulfonated copper–phthalocyanine in a hybrid microcapsule structure, in which the organic component provides a capable environment for its catalytic activity in epoxidation reactions and the nanoassembled structure imparts stability.